McAfee M-1250 - Network Security Platform Guia do Utilizador

This Quick Start Guide explains how to quickly set up and activate your McAfee® NetworkSecurity Platform M-1250/M-1450 Sensor in in-line mode. Cabling

9 You're up and running!Your Sensor is actively monitoring connected segments and communicating with the Manager foradministration and management

11

Copyright © 2014 McAfee, Inc. www.intelsecurity.comIntel and the Intel logo are trademarks/registered trademarks of Intel Corporation. McAfee and the

1 Position the SensoraKeep the mounting ears and screws ready. bAttach the ears to the Sensor. cInstall the Sensor into a rack. 2 Cabling the Manag

The required settings for HyperTerminal are:• Baud rate: 38400 • Stop Bits: 1• Number of Bits: 8 • Control Flow: None• Parity: NoneePlug the female en

eDownload the zip file to the target Windows server and extract the setup file.fDouble-click Manager_<version>_setup.exe and follow the on scree

The Add New Device page is displayed. eEnter information in the appropriate fields and click Save.Remember the Shared Secret value entered at this st

The Sensor prompts you to enter thenew password and prompts you for theold password.A password must contain between 8 and 25 characters, is case-sensi

The Sensor then prompts you to enter the shared key value and confirm the same.This value is used to establish a trust relationship between the Sensor

The status report appears bReturn to the Manager. In the Manager Home page, view the Manager status in the System Healthsection.Manager status should

dSelect your added Sensor: Device List | Sensor_Name. The ports for this Sensor appear under theSensor_Name node."Device_Name" indicates the